제조사 | Arduino |
---|---|
브랜드 | Arduino |
판매가 | 9,900원 |
적립금 | 90원 |
자체상품코드 | P-T154 |
국내·해외배송 | 국내배송 |
배송방법 | 택배 |
수량 |
COMMENT |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드
OVERVIEW |
The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project,or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino MEGA I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom Arduino circuit into a single module.
Getting StartedYou can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics.. Need Help?
|
TECH SPECS | ||||
|
DOCUMENTATION |
OSH: SchematicsThe Arduino Mega Proto Shield is open-source hardware! You can build your own board using the following files:
DescriptionBoard features as follows:
PowerThe Proto Shield bring the power from the Arduino standard 5V and GND pins to the two power bus rows placed between the Through Hole package footprint, which can be used for powering the DIP sockets, or for power and ground rows. Physical CharacteristicsThe maximum length and width of the Proto Shield PCB are 2.7 and 2.1 inches respectively. Three screw holes allow the shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins. SPI ConnectionOn the ICSP connector only 5V, GND and RST are wired to the respective pins on the header. MOSI and MISO are present only on the connector pads. For more information about the SPI communication see the SPI library.
|